AirGuard 4.0 – the new generation

Just like the AirGuard 3.0, the AirGuard 4.0 can read out all sensor types available on the market and then transmit the obtained data to the Herth+Buss wheel sensors either automatically or manually.

So what’s new? Firstly, the AirGuard 4.0 comes with OBD cables as the functions of the OBD-II-adapter and the teaching-in function are already integrated here. This means there is no need to connect an additional adapter. The AirGuard 4.0 also shows where exactly the OBD II socket is located in the vehicle. Another special feature is the built-in tread depth gauge. The measurements can then be stored on the AirGuard 4.0. The built-in camera can be used to take pictures of damage or numberplates and store them in the individual customer file. Up to 100 data records can be saved on the AirGuard 4.0. The documented data can then be transferred to a computer using the USB interface, stored there and retrieved as required. Our additionally available OBD-II-Bluetooth module also lets you read out and delete fault memories (DTC).

Our TPMS range is rounded off with our wheel sensors. They can be used in all vehicles with an active tyre pressure monitoring system installed as standard. The sensors are universally programmable. Either our AirGuard 3.0 or AirGuard 4.0 is required for programming. The sensors can be ordered individually and are supplied with a complete valve. Programming only takes between five and fifteen seconds per sensor. One benefit of our wheel sensors: The original ID number can be copied from the old sensor to the new one or re-assigned. The wheel sensors can also be rewritten.

Programming/diagnostic device, tyre pressure monitoring system
AirGuard
Article number: 95990021

OBD-II-Bluetooth adapter, tyre pressure monitoring system
Programming/diagnostic device, tyre pressure monitoring system
AirGuard
Article number: 95990022